Thermal Monocular Yukon Pulsar

Specifications:

Magnification: 2.8x / 5.6x
Refresh rate: 30 Hz
Range of detection: 1250 m
Operating tamperatures: -25 ... +50 °C
Calibration modes: silent (manual),
automatic, semiautomatic


Calibration

The Quantum suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.


Quick start-up time

The Quantum imaging scopes feature short start-up time (5 - 7 seconds) from the push of a button to full operational status. This is one of the best results in its class.


Body

The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit.


Brightness and contrast control

The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation. 


Video output

All Quantum models are equipped with an analog video output to enable connection of external recording equipment or transmitting image to the display.


Operating modes

The Quantum S suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).


Long detection range

High resolution (384x288) microbolometer ensures detailed image and long detection range. 


Wide range of operating temperatures

Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display employed in the unit (image remains the same as when viewing at positive environment temperature).


Self-contained power supply

The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.


External power supply

Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes.


Parameters:

Electronic components Frame Rate, Hz     30
Microbolometer resolution, pixels     384x288
Display type     OLED
Display Resolution, pix.     640x480
Optical characteristics Magnification    2.8x
Digital zoom, x     2
Objective Lens     F50/1.2
Field of View,°, horizontal * vertical     11x8.3
Eye Relief, mm     20
Diopter adjustment, dptr.     ± 5
Range of Detection, m Range of detection, m (object (high*width = 1,7*0,5m)     1250
Power Supply Power Supply, V     4 ÷ 6
Battery type     4xAA
Battery Life, hour     4.5 ...5.5 (video output off).
External Power Supply     DC 8.4 ÷ 15
Physical & operational characteristics Operating Temperature,°C     - 25 … +50
Level of Protection (acc. to IEC 60529)     IPX4
Dimensions, mm     207x86x59
Weight (without batteries), kg     0.43